Setting up Digikey for Kicad
In this quick awesome article we go over installing Digikey's 23,000 schematics to Kicad!
Check this out 23,000+ supported devices very quickly installed:
- Please note the standard kicad 6.0 from some versions of Linux will not work you need the 9.0 Version as in:
- https://www.hotconfig.com/setting-up-kicad-in-parrotos/
We are following this guide: https://forum.digikey.com/t/importing-the-digi-key-kicad-library-into-kicad-5-0-0/4075
git clone https://github.com/Digi-Key/digikey-kicad-library.git
Once you have cloned it, inside your kicad schematic editor:
Add existing library:
Select one - press Ctrl-A
And it should automatically import!
